We supply fiber optic cable and bare optical fibers, serving telecom distributors, data center integrators, and network installers across Europe, North America, the Middle East, and Southeast Asia. All products are available in OEM / custom packaging, private labeling, and bespoke lengths — no MOQ pressure for qualified partners.
Fiber Optic cable Categories
1. Bare Optical Fiber — G.652.D & G.657 Series
The raw material for pigtails, patch cords, and cable manufacturing.
| Parameter | G.652.D | G.657.A1 | G.657.A2 | G.657.B3 |
|---|---|---|---|---|
| Fiber Type | Standard SMF (OS2) | Bend-Insensitive SMF | Bend-Insensitive SMF | Ultra Bend-Insensitive SMF |
| Core / Cladding | 9/125 µm | 9/125 µm | 9/125 µm | 9/125 µm |
| Coating Diameter | 242–255 µm | 242–255 µm | 242–255 µm | 242–255 µm |
| Min. Bend Radius (static) | 30 mm | 10 mm | 7.5 mm | 5 mm |
| Attenuation @ 1310 nm | ≤ 0.34 dB/km | ≤ 0.34 dB/km | ≤ 0.34 dB/km | ≤ 0.40 dB/km |
| Attenuation @ 1550 nm | ≤ 0.20 dB/km | ≤ 0.20 dB/km | ≤ 0.20 dB/km | ≤ 0.30 dB/km |
| ITU-T / IEC Standard | G.652.D / IEC 60793-2-50 B1.3 | G.657.A1 / B2 | G.657.A2 / B2 | G.657.B3 / B2 |
| Fully backward compatible with G.652.D | — | ✓ | ✓ | ✗ (extra splice loss) |
Typical Applications:
- G.652.D — OSP backbone, long-haul, metro, duct cables
- G.657.A1 — FTTH drop cables, indoor riser, ODF pigtails
- G.657.A2 — Data center patch cords, MDU, tight-buffer indoor cables
- G.657.B3 — FTTR invisible cables, extreme-bend short-reach indoor runs
Packaging: Standard fiber reels (25.2 km / 50.4 km) or custom-cut lengths (1 km / 2 km / 5 km per spool). Each reel comes with an OTDR test report and geometric data sheet.
Customization Options:
- Custom reel length and labeling
- Private label / neutral packaging


2. Tight-Buffered Fiber & Indoor Cable
Ready-to-terminate indoor cables for patch cord manufacturing, ODF termination, and FTTH distribution.
| Model | Fiber Type | Buffer OD | Jacket OD | Jacket Material | Core Count |
|---|---|---|---|---|---|
| GJFJV (Simplex) | G.652.D / G.657.A2 / OM3/OM4 | 900 µm | 2.0 × 3.0 mm | PVC / LSZH / OFNR / OFNP | 1 |
| GJFJV (Duplex Zipcord) | G.652.D / G.657.A2 / OM3/OM4 | 900 µm | 2.0 × 4.1 mm | PVC / LSZH / OFNR / OFNP | 2 |
| GJFJV (Distribution) | G.652.D / G.657.A2 / OM3/OM4 | 900 µm | 4.0–12.0 mm | PVC / LSZH / OFNR | 2–24 |
| GJFJV (Breakout) | G.652.D / G.657.A2 / OM3/OM4 | 900 µm | 6.0–14.0 mm | PVC / LSZH / OFNR | 2–24 |
Key Features:
- 900 µm tight buffer directly over 250 µm coated fiber — no loose tube, no gel
- Easy to strip and connectorize with standard LC / SC / ST / FC / MPO connectors
- Flame-retardant jackets: PVC (CM/CMR), LSZH (IEC 60332-1), OFNP (plenum)
- Color-coded per TIA-598 (SM: yellow, OM1: orange, OM2: orange, OM3: aqua, OM4: magenta, OM5: lime green)
Typical Applications:
- Patch cord and pigtail manufacturing
- ODF / patch panel termination
- FTTH indoor drop cables
- Data center horizontal cabling
- Equipment room jumper assemblies
Customization Options:
- Custom jacket color, print text, and length
- Pre-terminated with connectors (LC / SC / ST / FC / MPO, UPC / APC)
- Fan-out kits (12-fiber MPO to LC/SC pigtails)
- Private label / OEM packaging


3. Outdoor Loose-Tube Fiber Optic Cables
Armored and non-armored cables for duct, aerial, direct burial, and underwater installations.
| Model | Armor Type | Sheath | Fiber Count | Typical Application |
|---|---|---|---|---|
| GYTA | Aluminum-PE laminate (APL) | PE | 2–288 | Duct, aerial, moisture-resistant |
| GYTS | Corrugated steel tape | PE | 2–288 | Duct, light direct burial, rodent protection |
| GYTA53 | APL + steel tape armor + PE outer | PE | 2–288 | Direct burial, high moisture, high crush |
| GYTY53 | PE inner + steel tape armor + PE outer | PE | 2–288 | Direct burial, high crush resistance |
| GYTA33 | APL + steel wire armor + PE outer | PE | 2–144 | River crossing, steep slopes, submarine |
| GYFTY | FRP (non-metallic) | PE | 2–144 | Power lines, lightning-prone areas, all-dielectric |
| GYXTY | Central tube + steel tape | PE | 2–12 | Small-count aerial / duct, low-cost |
| ADSS | All-dielectric self-supporting | PE | 2–144 | Aerial on power transmission lines |
Key Features:
- Loose-tube gel-filled or dry water-blocking design
- Single-mode (G.652.D / G.657.A2) or multimode (OM1–OM5)
- Tensile strength: up to 10,000 N (varies by model)
- Crush resistance: up to 3,000 N/100 mm (armored types)
- Operating temperature: –40°C to +70°C
- Each drum shipped with OTDR trace and attenuation test report
Typical Applications:
- FTTx backbone and distribution networks
- Metropolitan area networks (MAN)
- Campus and enterprise campus cabling
- Long-haul and submarine links
- Power utility and railway communication
Customization Options:
- Custom fiber count and fiber type mix (hybrid SM + MM)
- Custom drum length (1,000 m / 2,000 m / 4,000 m / 6,000 m)
- Private label / OEM branding on jacket and drum label
- Dry water-blocking (no gel) available for indoor-outdoor transition
- LSZH outer sheath available for tunnel / building entry


4. Fiber Patch Cords, Pigtails & Pre-Terminated Assemblies
Factory-terminated and 100% tested for low insertion loss and high return loss.
Find more information at Patch Cord & Pigtail











Reviews
There are no reviews yet.