PLC Fiber Optic Splitter

The PLC  fiber optic splitter is a passive optical device designed to distribute a single optical signal evenly across multiple output channels. Built on advanced silica waveguide technology, it delivers consistent splitting performance across the full 1260–1650 nm wavelength range, making it the industry standard for GPON, EPON, XGS-PON, and FTTx deployments.

Whether you are building a greenfield FTTH network, upgrading an existing PON infrastructure, or deploying fiber-to-the-antenna (FTTA) systems, our PLC splitters provide the reliability, uniformity, and low insertion loss your network demands.

The PLC fiber optic splitter is a passive optical device designed to distribute a single optical signal evenly across multiple output channels. As a leading FTTH splitter solution, it supports GPON, EPON, and XGS-PON deployments worldwide.

Key Features

  • Uniform Power Distribution – Each output port receives an equal share of the optical signal, ensuring balanced performance across all branches.
  • Ultra-Low Insertion Loss – Typical IL as low as 0.3 dB for 1×2 configurations, with tight loss budgets for high-split-ratio designs.
  • Wavelength Independence – Operates across 1260–1650 nm, supporting single-window and dual-window applications without performance degradation.
  • High Return Loss – ≥50 dB (UPC) / ≥60 dB (APC), minimizing back-reflection and ensuring stable laser operation.
  • Wide Operating Temperature – Rated from -40°C to +85°C, suitable for indoor cabinets, outdoor closures, and harsh-environment OSP deployments.
  • Compact & Modular Packaging – Available in bare fiber, ABS box, mini plug-in cassette, steel tube, and 19-inch rack-mount formats to fit any installation scenario.

Technical Specifications

Parameter 1×2 1×4 1×8 1×16 1×32 1×64
Insertion Loss (dB) ≤3.8 ≤7.2 ≤10.5 ≤13.8 ≤17.0 ≤20.5
Uniformity (dB) ≤0.6 ≤0.8 ≤1.0 ≤1.4 ≤1.6 ≤2.0
PDL (dB) ≤0.2 ≤0.2 ≤0.3 ≤0.3 ≤0.3 ≤0.4
Return Loss (dB) ≥50 (UPC) / ≥60 (APC)
Directivity (dB) ≥55
Operating Temp. -40°C to +85°C
Wavelength Range 1260–1650 nm
Fiber Type G.657A1 / G.657A2 / G.652D

Available Configurations

By Split Ratio

1×2, 1×4, 1×8, 1×16, 1×32, 1×64, 2×4, 2×8, 2×16, 2×32

By Packaging Type

  • Bare Fiber Splitter – 250 μm pigtails, ideal for direct splicing inside splice closures and distribution boxes.
  • ABS Box Splitter – Rugged ABS housing with pre-terminated SC/LC/FC connectors; plug-and-play for fast field installation.
  • Mini Plug-in Cassette – Snap-in design for patch panels and ODFs; saves rack space.
  • Steel Tube Splitter – Stainless steel protection for outdoor and industrial environments.
  • 19″ Rack Mount – High-density chassis for central offices and data centers.

By Connector Type

SC/UPC, SC/APC, LC/UPC, LC/APC, FC/UPC, FC/APC — all with 0.5m to 2.0m pigtail lengths (custom lengths available).

ABS Box SplitterMini Plug-in Cassette PLC splitterSéparateur à fibre optique PLC


Applications

  • FTTH / FTTx Networks – Distribute OLT signals to multiple ONTs in residential and MDU deployments.
  • GPON / EPON / XGS-PON Systems – Reliable power splitting for passive optical access networks.
  • CATV / RFoG – Splitting RF-over-fiber signals for cable television headends and distribution.
  • Data Centers – High-density fiber management and signal distribution in DCI environments.
  • Fiber Optic Sensing – Signal distribution for distributed temperature sensing (DTS) and monitoring systems.
  • Telecom Central Offices – Backbone infrastructure and ODN aggregation.

FAQ for PLC Fiber Optic Splitter Selection

Q: What is the difference between a PLC splitter and an FBT splitter?
A: PLC splitters use photolithographic waveguide technology on a silica chip, offering superior uniformity, lower insertion loss, and wavelength independence across 1260–1650 nm. FBT splitters use fused fiber tapering and are more cost-effective for low-port-count applications (1×2 to 1×8), but they lack the consistency and bandwidth of PLC splitters for high-density PON networks.

Q: Should I use UPC or APC connectors for my PLC splitter?
A: For most PON and FTTH applications, APC (angled physical contact) connectors are recommended because they provide higher return loss (≥60 dB), which reduces back-reflection and improves signal quality. UPC connectors (≥50 dB) are suitable for non-PON applications such as data centers and test equipment.

Q: Can I get custom pigtail lengths?
A: Yes. We offer custom pigtail lengths from 0.5m to 5.0m and beyond. Please specify your requirements when placing an order.

Q: Are test reports provided?
A: Yes. Every PLC splitter is individually tested, and a detailed test report including IL, RL, and uniformity data is provided with each shipment.

Reviews

There are no reviews yet.

Be the first to review “PLC Fiber Optic Splitter”

Your email address will not be published. Required fields are marked *