Fiber Optic Cable & Bare Fiber Products

We supply fiber optic cable and bare optical fibers, serving telecom distributors, data center integrators, and network installers across Europe, North America, the Middle East, and Southeast Asia.

We supply fiber optic cable and bare optical fibers, serving telecom distributors, data center integrators, and network installers across Europe, North America, the Middle East, and Southeast Asia. All products are available in OEM / custom packaging, private labeling, and bespoke lengths — no MOQ pressure for qualified partners.

Fiber Optic cable  Categories

1. Bare Optical Fiber — G.652.D & G.657 Series

The raw material for pigtails, patch cords, and cable manufacturing.

Parameter G.652.D G.657.A1 G.657.A2 G.657.B3
Fiber Type Standard SMF (OS2) Bend-Insensitive SMF Bend-Insensitive SMF Ultra Bend-Insensitive SMF
Core / Cladding 9/125 µm 9/125 µm 9/125 µm 9/125 µm
Coating Diameter 242–255 µm 242–255 µm 242–255 µm 242–255 µm
Min. Bend Radius (static) 30 mm 10 mm 7.5 mm 5 mm
Attenuation @ 1310 nm ≤ 0.34 dB/km ≤ 0.34 dB/km ≤ 0.34 dB/km ≤ 0.40 dB/km
Attenuation @ 1550 nm ≤ 0.20 dB/km ≤ 0.20 dB/km ≤ 0.20 dB/km ≤ 0.30 dB/km
ITU-T / IEC Standard G.652.D / IEC 60793-2-50 B1.3 G.657.A1 / B2 G.657.A2 / B2 G.657.B3 / B2
Fully backward compatible with G.652.D — ✓ ✓ ✗ (extra splice loss)

Typical Applications:

  • G.652.D — OSP backbone, long-haul, metro, duct cables
  • G.657.A1 — FTTH drop cables, indoor riser, ODF pigtails
  • G.657.A2 — Data center patch cords, MDU, tight-buffer indoor cables
  • G.657.B3 — FTTR invisible cables, extreme-bend short-reach indoor runs

Packaging: Standard fiber reels (25.2 km / 50.4 km) or custom-cut lengths (1 km / 2 km / 5 km per spool). Each reel comes with an OTDR test report and geometric data sheet.

Customization Options:

  • Custom reel length and labeling
  • Private label / neutral packaging

bare fiber opticbare fiber optic with LC connector

 

 

 

 

 

 

 

 

2. Tight-Buffered Fiber & Indoor Cable

Ready-to-terminate indoor cables for patch cord manufacturing, ODF termination, and FTTH distribution.

Model Fiber Type Buffer OD Jacket OD Jacket Material Core Count
GJFJV (Simplex) G.652.D / G.657.A2 / OM3/OM4 900 µm 2.0 × 3.0 mm PVC / LSZH / OFNR / OFNP 1
GJFJV (Duplex Zipcord) G.652.D / G.657.A2 / OM3/OM4 900 µm 2.0 × 4.1 mm PVC / LSZH / OFNR / OFNP 2
GJFJV (Distribution) G.652.D / G.657.A2 / OM3/OM4 900 µm 4.0–12.0 mm PVC / LSZH / OFNR 2–24
GJFJV (Breakout) G.652.D / G.657.A2 / OM3/OM4 900 µm 6.0–14.0 mm PVC / LSZH / OFNR 2–24

Key Features:

  • 900 µm tight buffer directly over 250 µm coated fiber — no loose tube, no gel
  • Easy to strip and connectorize with standard LC / SC / ST / FC / MPO connectors
  • Flame-retardant jackets: PVC (CM/CMR), LSZH (IEC 60332-1), OFNP (plenum)
  • Color-coded per TIA-598 (SM: yellow, OM1: orange, OM2: orange, OM3: aqua, OM4: magenta, OM5: lime green)

Typical Applications:

  • Patch cord and pigtail manufacturing
  • ODF / patch panel termination
  • FTTH indoor drop cables
  • Data center horizontal cabling
  • Equipment room jumper assemblies

Customization Options:

  • Custom jacket color, print text, and length
  • Pre-terminated with connectors (LC / SC / ST / FC / MPO, UPC / APC)
  • Fan-out kits (12-fiber MPO to LC/SC pigtails)
  • Private label / OEM packaging

indoor optic fiber24 core indoor fiber os2 G652D

3. Outdoor Loose-Tube Fiber Optic Cables

Armored and non-armored cables for duct, aerial, direct burial, and underwater installations.

Model Armor Type Sheath Fiber Count Typical Application
GYTA Aluminum-PE laminate (APL) PE 2–288 Duct, aerial, moisture-resistant
GYTS Corrugated steel tape PE 2–288 Duct, light direct burial, rodent protection
GYTA53 APL + steel tape armor + PE outer PE 2–288 Direct burial, high moisture, high crush
GYTY53 PE inner + steel tape armor + PE outer PE 2–288 Direct burial, high crush resistance
GYTA33 APL + steel wire armor + PE outer PE 2–144 River crossing, steep slopes, submarine
GYFTY FRP (non-metallic) PE 2–144 Power lines, lightning-prone areas, all-dielectric
GYXTY Central tube + steel tape PE 2–12 Small-count aerial / duct, low-cost
ADSS All-dielectric self-supporting PE 2–144 Aerial on power transmission lines

Key Features:

  • Loose-tube gel-filled or dry water-blocking design
  • Single-mode (G.652.D / G.657.A2) or multimode (OM1–OM5)
  • Tensile strength: up to 10,000 N (varies by model)
  • Crush resistance: up to 3,000 N/100 mm (armored types)
  • Operating temperature: –40°C to +70°C
  • Each drum shipped with OTDR trace and attenuation test report

Typical Applications:

  • FTTx backbone and distribution networks
  • Metropolitan area networks (MAN)
  • Campus and enterprise campus cabling
  • Long-haul and submarine links
  • Power utility and railway communication

Customization Options:

  • Custom fiber count and fiber type mix (hybrid SM + MM)
  • Custom drum length (1,000 m / 2,000 m / 4,000 m / 6,000 m)
  • Private label / OEM branding on jacket and drum label
  • Dry water-blocking (no gel) available for indoor-outdoor transition
  • LSZH outer sheath available for tunnel / building entry

Outdoor Loose-Tube Fiber Optic CablesOutdoor Loose-Tube Fiber Optic Cables

4. Fiber Patch Cords, Pigtails & Pre-Terminated Assemblies

Factory-terminated and 100% tested for low insertion loss and high return loss.

Find more information at  Patch Cord & Pigtail 

 

Reviews

There are no reviews yet.

Be the first to review “Fiber Optic Cable & Bare Fiber Products”

Your email address will not be published. Required fields are marked *